1. Softened water to Electrolytic Cell & Brine Tank.
2. Salt and Water mix in the Brine Tank to form saturated brine.
3. Saturated Brine enters the Electrolytic Cell.
4. Electrical Current is passed through the Electrolytic Cell producing Oxidant.
5. Hydrogen Gas produced during the Electrolysis Process is vented outside.
6. Oxidant Solution leaves the Electrolytic Cell and is stored in the Oxidant Tank.
7. Oxidant Solution is dosed into the Treatment Process by a metering pump.
8. MIOX equipment turns ON/OFF from a level switch signal located inside the Oxidant Tank.